{"product_id":"shadow-varsity-20-embroidery-design","title":"Shadow Varsity 20 Embroidery Design","description":"\u003ch1\u003eShadow Varsity 20 Embroidery Design: Outline Varsity Number Machine Embroidery File\u003c\/h1\u003e\n\n\u003cp\u003eThis Shadow Varsity 20 embroidery design is a large-format, outline-only machine embroidery file featuring the number 20 in a bold varsity block typeface, rendered entirely as satin border outlines with fully open interior fields and no fill stitching anywhere in the design. The 2 is constructed with chamfered top corners, a curved upper arc, diagonal mid-stem, and a wide flat base, all traced as satin border paths with open interiors. The 0 repeats the octagonal chamfered-corner ring construction used in the Shadow Varsity 10. At 8.73 x 7.12 inches this is the widest number design in the collection. Total stitch count is 17,019 stitches.\u003c\/p\u003e\n\n\u003cp\u003eWhat distinguishes this design from the Shadow Varsity 10 in this collection is the introduction of the 2 digit, which is the more complex of the two forms. The 0 in both designs shares the same octagonal ring geometry; the 2 replaces the 1 with a digit that carries a curved upper arc, a diagonal stem transition, and a flat base with its own inner border path following the full interior contour of the curved and angular form. Managing inner and outer border path alignment across the compound curves and angular transitions of the 2 at this large scale is the challenge that separates this file from its predecessor.\u003c\/p\u003e\n\n\u003ch2\u003eDesign Details\u003c\/h2\u003e\n\n\u003cp\u003eThe 2 occupies the left portion of the composition. Its outer silhouette features chamfered corners at the upper left and upper right where the curved top arc meets the vertical sides, giving the digit the characteristic varsity block corner treatment. The outer border satin traces the full perimeter of the 2: the curved upper arc, the right vertical, the diagonal mid-stem, and the flat rectangular base. The inner border satin follows the same path at a reduced offset, creating the open interior field of the digit. A small rectangular notch at the inner upper-right corner of the 2 where the top arc meets the stem is traced with its own short inner border segment, giving the counter its correct geometric form. The 0 occupies the right portion of the composition as a large octagonal ring, identical in construction to the 0 in the Shadow Varsity 10, with outer and inner octagonal border satin paths and a fully open body and counter. Both digits share the same outer and inner border satin column weight. All satin paths stitch in a single dark charcoal thread throughout.\u003c\/p\u003e\n\n\u003ch2\u003eSize Guide\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSize\u003c\/th\u003e\n      \u003cth\u003eDimensions\u003c\/th\u003e\n      \u003cth\u003eStitch Count\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStandard\u003c\/td\u003e\n      \u003ctd\u003e8.73 x 7.12 in\u003c\/td\u003e\n      \u003ctd\u003e17,019\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFormats Included\u003c\/h2\u003e\n\n\u003cp\u003eThis design is delivered in 26 file formats compatible with all major machine brands: PES, PEC (Brother, Baby Lock, Bernina) | DST, DSB (Tajima) | JEF, SEW (Janome, Elna) | VP3, VIP, SHV, HUS (Husqvarna Viking) | PCS, PCQ, PCD (Pfaff) | XXX (Singer) | ART (Bernina software) | 000 (Singer\/generic) | 100 (Toyota) | CND (Melco\/Conde) | CSD (Singer\/POEM) | DGT (Barudan) | DSZ (Tajima older) | EMD (Elna) | EXP (Melco\/Bernina) | INF (design info)\u003c\/p\u003e\n\n\u003ch2\u003eDigitizing Quality\u003c\/h2\u003e\n\n\u003cp\u003eThe most demanding element in this design is aligning the inner and outer border satin paths of the 2 through its compound form. The outer border transitions from a curved arc at the top through chamfered corners into straight vertical and diagonal segments, and the inner border must track each of these transitions at a precisely consistent offset distance. Any deviation in the offset between inner and outer paths reads as an uneven stroke weight on the finished piece, which is immediately apparent at the 8.73 inch width where every millimeter of inconsistency is visible. Each transition point was set with matching node pairs on both paths to maintain the offset precisely through every direction change.\u003c\/p\u003e\n\n\u003cp\u003eThe diagonal mid-stem of the 2 presents a specific miter challenge where it meets both the upper arc and the flat base. At each junction, the diagonal satin path must meet its neighbor at a clean miter angle rather than a stepped or overlapping join. The miter geometry was calculated for the exact angle of the diagonal relative to both adjacent segments, and the satin path endpoints were set to the precise overlap amount needed to produce a clean closed corner at both junctions without excess thread buildup at the meeting points.\u003c\/p\u003e\n\n\u003cp\u003eAt 17,019 stitches across an 8.73 x 7.12 inch footprint, this is the highest stitch count outline-only design in the collection. Without fill stabilization beneath the satin paths, the fabric is free to shift during the extended stitch run. A full-perimeter edge-walk underlay was applied beneath all outer border paths before the satin fill pass, pre-tensioning the fabric along each digit edge and reducing shift across the full run. The inner border paths were sequenced as the final pass on each digit after all outer border work was complete.\u003c\/p\u003e\n\n\u003ch2\u003eLicense\u003c\/h2\u003e\n\n\u003cp\u003eThis design is licensed for commercial use on finished physical goods. You may sell embroidered items made with this file without per-item royalty. Digital files, including all included formats, may not be resold, redistributed, or shared in any form, whether modified or unmodified.\u003c\/p\u003e\n\n\u003ch2\u003eInstant Download\u003c\/h2\u003e\n\n\u003cp\u003eFiles are available immediately after purchase. This listing includes 1 size in 26 file formats, covering every major home and commercial embroidery machine brand. Download, unzip, and load directly into your machine or embroidery software.\u003c\/p\u003e","brand":"Bundzy","offers":[{"title":"Default Title","offer_id":53681304994156,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0971\/3945\/8412\/files\/Shadow-Varsity-20-Embroidery-Design.webp?v=1777443216","url":"https:\/\/bundzy.com\/products\/shadow-varsity-20-embroidery-design","provider":"Bundzy","version":"1.0","type":"link"}