Adorable Floating Bunny Embroidery Design: Cute Baby Bunny Balloon Machine Embroidery File

This Adorable Floating Bunny embroidery design is a sweet, storybook-style machine embroidery file featuring a round baby bunny drifting upward while clutching a balloon string, rendered in a warm two-tone palette of chestnut brown and soft dusty pink. The bunny body is built from smooth curved directional fills, with the balloon above constructed as a large circular fill and connected by a fine running stitch string. A pink ribbon bow tied at the bunny's chest and a pair of soft pink inner-ear fills complete the color palette. Total stitch count is 5,535 stitches.

What distinguishes this design from other cute animal embroidery files is the compositional relationship between the balloon and the bunny body across the full vertical height of the design. The balloon sits at the top and the bunny hangs below it, with only a single fine string connecting them, meaning the two main filled elements are separated by open negative space. This requires the design to read as a unified composition without a shared boundary, relying entirely on the string element and the diagonal body posture of the bunny to hold the two parts together visually.

Design Details

The balloon is the topmost element, rendered as a large smooth circle in dusty pink with a dense directional fill running at a slight diagonal across its full surface. The balloon perimeter is outlined with a dark brown satin stitch border that matches the bunny body outline color, tying the two elements together tonally. A fine running stitch string descends from the base of the balloon to the bunny's raised paw, rendered as a single or double run stitch line in dark brown. The bunny head and body are merged into a single large rounded form in chestnut brown, with a smooth directional fill covering the full volume. The head is positioned slightly left of center, with two ears rising above: the right ear is fully brown-filled and upright, while the left ear droops outward and carries a soft pink inner-ear fill along its inner surface. The face detail is minimal and charming, with small closed eye stitches suggesting a content, sleeping expression. At the chest, a pink ribbon bow is formed from two looped satin-filled wings with trailing ribbon ends, adding a soft decorative accent against the brown body. The front paw reaching upward toward the string is defined by a small curved satin section in brown. The rear legs and tail are suggested by two small rounded protrusions at the lower body, each outlined in dark brown running stitch. All body and balloon edges carry the dark brown outline throughout.

Size Guide

Formats Included

• PES, PEC - Brother, Baby Lock, Bernina
• DST, DSB - Tajima
• JEF, SEW - Janome, Elna
• VP3, VIP, SHV, HUS - Husqvarna Viking
• PCS, PCQ, PCD - Pfaff
• XXX - Singer
• ART - Bernina software
• 000 - Singer/generic
• 100 - Toyota
• CND - Melco/Conde
• CSD - Singer/POEM
• DGT - Barudan
• DSZ - Tajima older
• EMD - Elna
• EXP - Melco/Bernina
• INF - design info

Digitizing Quality

The main technical challenge in this design is stitching a large circular balloon fill at small scale without the circular perimeter pulling inward and distorting the balloon into an oval. A full-coverage cross-hatch underlay was applied beneath the balloon fill to stabilize the fabric across the entire circular area before the top fill is laid, and the fill density was calibrated to avoid excess thread weight that would compound the pull effect. The result is a balloon that holds its round shape cleanly on the finished piece.

The drooping left ear required careful handling because it extends outward from the body at an angle and tapers to a soft rounded tip, with a two-layer construction of brown outer fill and pink inner fill. At 2.32 inches total design width, the inner ear fill is narrow enough that density must be reduced to prevent the pink layer from pushing through the brown outer stitching at the ear edges. The inner fill was digitized at reduced density with a short underlay to keep it sitting cleanly inside the brown border without bleed.

The ribbon bow at the chest is the most detail-dense element relative to its size in the design. Each bow loop is a small satin-filled oval, and the trailing ribbon ends taper to fine points. At this scale, the ribbon ends were handled with manually tapered column fills to prevent thread stacking at the tips, keeping the bow looking delicate rather than bulky against the brown body fill beneath it.

License

This design is licensed for commercial use on finished physical goods. You may sell embroidered items made with this file without per-item royalty. Digital files, including all included formats, may not be resold, redistributed, or shared in any form, whether modified or unmodified.

Instant Download

Files are available immediately after purchase. This listing includes 1 size in 26 file formats, covering every major home and commercial embroidery machine brand. Download, unzip, and load directly into your machine or embroidery software.