Green Leaf Embroidery Design: Cannabis Leaf Patch Machine Embroidery File

The Green Leaf embroidery design is a two-color circular patch composition featuring a bright green cannabis leaf centered on a fully filled dark charcoal background disc, enclosed by a thick dark satin stitch border ring that completes the patch-ready badge format. The leaf is constructed from seven individual pointed leaflet fills radiating from a central stem, each leaflet worked in bright green satin fill with a directional stitch angle specific to its orientation, creating the characteristic serrated multi-leaflet silhouette of a cannabis leaf against the dark background. Total stitch count is 4,656 stitches.

What distinguishes this design from other botanical or emblem patch embroidery files in a graphic collection is the high-contrast two-color construction within a circular patch format at under 2 inches. The bright green leaf sits directly over a dense dark fill without a separating outline between the leaf and the background, meaning the visual clarity of the leaf silhouette depends entirely on the precision of the green fill boundaries terminating cleanly at the edge of the dark background fill beneath, with no buffer outline to hide any boundary drift on fabric.

Design Details

The outermost element is a thick circular border band in dark charcoal satin fill, stitched with a curved fill direction that follows the ring circumference and provides the patch with a clean finished edge. Inside the border, the circular background is filled with a dense dark charcoal fill in a diagonal satin stitch direction, creating a textured field that contrasts with the bright green leaf stitched over it.

The cannabis leaf is positioned at the center of the disc with its stem running vertically from the lower center to the upper leaf apex. The leaf is constructed from seven pointed leaflet fills: a tall central leaflet pointing straight upward, two pairs of progressively shorter lateral leaflets angling outward on each side, and two short lower leaflets that angle downward near the stem base. Each leaflet is an individual satin fill with its stitch direction aligned along the leaflet length from stem to tip, creating a smooth reflective surface that reads as bright and distinct against the dark background. Between adjacent leaflets, narrow unstitched gaps separate the fills and define the individual leaflet silhouettes within the overall leaf shape.

Size Guide

Formats Included

• PES, PEC — Brother, Baby Lock, Bernina
• DST, DSB — Tajima
• JEF, SEW — Janome, Elna
• VP3, VIP, SHV, HUS — Husqvarna Viking
• PCS, PCQ, PCD — Pfaff
• XXX — Singer
• ART — Bernina software
• 000 — Singer/generic
• 100 — Toyota
• CND — Melco/Conde
• CSD — Singer/POEM
• DGT — Barudan
• DSZ — Tajima older
• EMD — Elna
• EXP — Melco/Bernina
• INF — design info

Digitizing Quality

The primary technical challenge in this design is achieving clean green leaflet fill boundaries directly over the dark charcoal background fill without a separating outline stitch. Where the green leaflet edges terminate against the dark background, any outward pull in the green fills would cause the leaf boundary to bleed into the dark fill and soften the leaf silhouette. Each leaflet fill uses inward pull compensation so the green boundaries contract toward the leaf center rather than expanding toward the background, preserving the crisp leaflet silhouette that gives the design its high-contrast visual clarity at this compact size.

The narrow unstitched gaps between adjacent leaflets must remain open and consistent in width despite being flanked on both sides by green fills that pull toward each other. At under 2 inches, these inter-leaflet gaps are very narrow channels where even slight fill expansion from either adjacent leaflet would close the gap and merge two leaflets into a single undifferentiated green mass. The gap width and the pull compensation on both flanking fills are set in coordination so the gaps remain uniform from leaflet base to leaflet tip on all seven leaflets.

The leaflet tips taper to sharp points at the outer perimeter of the leaf, and at this overall design size the individual tip points are very small satin fill terminations. Each leaflet tip is individually digitized to converge cleanly to a fine point without producing a blunt or fringed end, and the stitch path at each tip is shortened progressively through the final stitches to ensure the termination is clean and the point reads as sharp against the dark background field.

License

This design is licensed for personal use and small commercial production of finished physical goods. You may sell embroidered items created with this file. The digital files themselves may not be resold, redistributed, shared, or included in any digital product collection.

Instant Download

Files are available immediately after purchase with no waiting and no shipping. This listing includes 1 size in 26 embroidery formats. Complete your purchase and download your full file package directly from your order confirmation.