Scalloped Badge Embroidery Design: Blank Label Frame Machine Embroidery File

The Scalloped Badge embroidery design is a clean, fully filled badge frame in vivid kelly green, featuring an octagonal base shape with alternating concave scallop curves and small pointed bracket projections around its perimeter, finished with a smooth satin stitch border following the full outline. The interior of the badge is left as open filled space with no text or motif, making it a versatile blank frame ready to combine with lettering, monograms, or additional embroidery elements. This design stitches out at 5,610 stitches.

What distinguishes this design from other badge or label frame embroideries in a utility collection is the specific perimeter geometry that combines two different ornamental edge treatments in alternating sequence. The scalloped concave curves and the outward-pointing bracket notches appear in a regular pattern around the eight sides of the frame, so the outline reads as neither a simple scallop border nor a simple pointed star, but as a more complex ornamental label shape associated with vintage stamps, wax seals, and decorative certificates. Digitizing this alternating perimeter geometry with consistent satin border width across all convex and concave curve transitions is the specific technical challenge that defines this file.

Design Details

The badge is roughly circular in overall proportion with eight segments around its perimeter, each segment alternating between a concave scallop curve that dips inward and a small outward-pointing bracket notch that projects beyond the general outline. The top and bottom center segments each carry a single pointed upward and downward bracket respectively, giving the badge a subtle vertical axis. The fill inside the badge body is a dense, smooth green satin or fill stitch surface running at a consistent diagonal angle across the full interior area. A continuous satin stitch border follows the full perimeter outline, maintaining an even width through every concave and convex curve change. The interior of the badge is entirely clear of additional stitching, providing a clean open ground for the embroiderer to add personalized text, initials, or a secondary design element on top. The vivid kelly green colorway gives the frame a fresh, modern quality that works well on white, black, and neutral garments alike.

Size Guide

Formats Included

This design includes 25 file formats compatible with all major embroidery machine brands: PES, PEC (Brother, Baby Lock, Bernina); DST, DSB (Tajima); JEF, SEW (Janome, Elna); VP3, VIP, SHV, HUS (Husqvarna Viking); PCS, PCQ, PCD (Pfaff); XXX (Singer); ART (Bernina software); 000 (Singer/generic); 100 (Toyota); CND (Melco/Conde); CSD (Singer/POEM); DGT (Barudan); DSZ (Tajima older); EMD (Elna); EXP (Melco/Bernina); INF (design info).

Digitizing Quality

The primary digitizing challenge in this design was maintaining consistent satin border width through the alternating concave and convex perimeter curves. At each concave scallop, the satin stitch must compress on the inner radius without creating gaps or sparse coverage, while at each outward bracket projection, the stitches must expand on the outer radius without piling up or causing the border to appear thicker on convex sections. The border path was digitized with angle compensation at every curve inflection point so the satin width reads as uniform around the full perimeter.

The pointed bracket projections required clean taper control at their outward tips. Each bracket point is a small sharp projection beyond the general circular outline, and the satin border must narrow smoothly to a fine point at each tip before widening again into the adjacent concave curve. The tip geometry was digitized with a precise taper node so each point reads as crisp and intentional rather than rounded or blunt, maintaining the decorative precision of the ornamental frame outline.

The interior fill density was calibrated to provide a smooth, flat surface suitable for over-stitching with additional text or design elements. An excessively dense interior fill would create a raised, stiff ground that resists secondary stitching and causes fabric distortion, while a fill that is too light would leave the fabric texture visible through the green thread. The fill density was set at a level that produces full color coverage with a slightly textured surface that accepts additional stitching without adhesion or layering problems.

License

This design is licensed for commercial use on finished physical goods. You may sell items you embroider using this file, including garments, accessories, home goods, and gifts. The digital files themselves may not be resold, redistributed, shared, or included in any digital product collection. Each purchase covers one user and one business.

Instant Download

Your files are available immediately after purchase with no waiting and no shipping. This listing includes 1 size in 25 formats, giving you complete coverage for every major embroidery machine brand in a single download. Add to cart, complete checkout, and your files are ready to sew today.